vibratory feeder
scientific structure induce feeding material evenly,variable feeding capacity and low equipment attrition
Features of Vibrating Feeder
simple construction, light weight, low noise, reliable working, arge feeding capacity, easy installation and maintenance.
Use self-synchronization principle of vibrating motor,rapidly start, stable work, smooth and steady park.
Feeding trough is small weared because of materials are throwed up and saltantly move forward as parabolic trajectory
The higher presion of feeding materials due to the spout can be altered and open and close instantaneous.
Working Principle of Vibrating Feeder
Use specially made vibrating motor or two motors to bring along exciter, which drives feeding
groove to make periodic linear and reciprocal vibration along the inclined direction in order to
complete feeding. When vertical component of feeding groove vibrating accelerated speed is
greater than gravity accelerated speed, materials are throwed up and saltantly move forward as parabolic trajectory; throwing up and falling are completed in a flash.Exciter source constantly excited and feeding groove constantly vibrate, coal in the groove constantly jump forward to complete the feeding.
Installation Requestment of Vibrating Feeder
To assure uniform and stable feeding and prevent materials from self flowing in ingredient and
quantitative feeding, feeder should be installed horizontally.for constant feeding of general
materials, it should be declined 10 degree to install; for viscosity materials and materials with
high moisture content, it should be declined 15 degree to install.
Feeder installed should leave motility gap 20 mm, across direction should be horizontal,
suspension equipment should be connected flexibly.
All bolts should be fastened once specially anchor bolt of vibrating motor and refastened when
they constantly run per 3 to 5 hours before dry practice.
Two vibrating motors must rotate reversely, timely stopping working to process when there is
abnormity on the stability of current and noise.
Motor bearing should be filled in once grease per 2 months and should be filled in once grease
Technical Parameter of Vibrating FeederModel
Capacity
Motor type
Power
(Kw)
Frequency
(r/min)
Exciting force(N)
Size(mm)
t/h
ZG25
60
25
YZO2.54
0.25*2
1500
5000
ZG30
60
30
YZO2.54
0.25*2
1500
5000
ZG60
90
60
YZO54
0.4*2
1500
10000
ZG80
160
80
YZO54
0.4*2
1500
10000
ZG100
210
100
YZO84
0.75*2
1500
16000
ZG200
270
200
YZO84
0.75*2
1500
16000
ZG300
300
300
YZO174
0.75*2
1500
34000
ZG400
300
400
YZO174
0.75*2
1500
34000
ZG500
300
500
YZO174
0.75*2
1000
34000
ZG750
400
750
YZO304
2.5*2
1000
60000
ZG1200
400
1200
YZO304
2.5*2
1000
60000
ZG1800
420
1800
YZO754
5.5*2
1000
150000
ZG2000
420
2000
YZO754
5.5*2
1000
150000
Note:ZG type vibrating feeder is unsuit for the explosion proof occasion.