PVC Swing Check Valve (Dual-Use in Vertical / Horizontal)
Size: DN20-DN150 ( 3/4"- 6" ) Working Pressure: 10kg/cm2 150 psi
PVC Swing Check Valve ( in Vertical or in Horizontal ) DIN, ANSI, JIS, BS Standard DN20-DN150 ( 3/4"- 6" ). EPDM Rubber. Working Pressure PN10
Feature:
Inclined Seal Plane Structure, Extra Weight in Flap, Can be Dual-Use in Vertical / Horizontal
Full-Flow, Low Resistance. Small Opening Pressure Shift
No Internal Exposed Metal Parts, No Springs, Not Easy to Be Blocked, Complete Anti-Corrosion
Low Open Pressure (<0.01kg/cm2).
Increased Wall Thickness, and Are Support to 1.5 Times the Back-Pressure PN
Connection with Stainless Steel Bolts , Easy Clean-Up of Internal Opening
CAUTION:
Arrow Mark Indicates the Flow of Fluid
When in Horizontal Install, Make Sure the Arrow Mark on the Top Side
1. PVC Check Valve DIN, ANSI, JIS, BS Standard DN20 ( 3/4" ) - DN150 ( 6" ) EPDM Rubber. BSPT or NPT
2. PVC Check Valve with Flange DIN, ANSI, JIS, BS Standard DN20 ( 2" ) - DN150 ( 6" ) EPDM Rubber.
Specification | Working Pressure | Carton Size | Carton | ||
Size MM | Size Inch | Pipe Dia. MM | MPa | CM | Set |
DN20 | 3/4" | 25 | 1.0MPa | 43x43x34.5 | 108 |
DN25 | 1" | 32 | 1.0MPa | 48x33x37 | 72 |
DN32 | 1-1/4" | 40 | 1.0MPa | 48.5x34x46 | 36 |
DN40 | 1-1/2" | 50 | 1.0MPa | 60x40x34 | 30 |
DN50 | 2" | 63 | 1.0MPa | 53x44x37 | 24 |
DN65 | 2-1/2" | 75 | 1.0MPa | 40x42x33 | 12 |
DN80 | 3" | 90 | 1.0MPa | 54x51x37 | 12 |
DN100 | 4" | 110 | 1.0MPa | 64x43x34 | 6 |
DN150 | 6" | 160 | 1.0MPa | 61x31x43 | 2 |