Welcome to B2BAGE
SOURCE UF 200 HOLLOW FIBER MEMBRANE MODULE ,HOLLOW FIBER UF MEMBRANE FOR INDUSTRIAL WATER TREATMENT EQUIPMENT
SOURCE UF 200 HOLLOW FIBER MEMBRANE MODULE ,HOLLOW FIBER UF MEMBRANE FOR INDUSTRIAL WATER TREATMENT EQUIPMENT

Minimum Order: 0
Quality/Safety Certification: 0.00


Membrane module SRUF-200
-UF technology is efficient,environmentally,energy-saving separtation process
-Water flux is large

Hollow-fiber Ultrafiltration Membrane Module SRUF-200

 

The characteristics of Ultrafiltration technology:

-UF tech. is an efficient and environmentally,energy-saving separation process

-Using lower pressure as a driving force

-UF separation process is on under room temperature,low energy consumption

-The scale and handle ability range of UF process is large

 

More info. pls visit to our website: www.suoai.en.alibaba.com

Any question pls feel free to contact us(Trade Manager is cn220180523)

 

Suoai Membrane Fairy: SRUF-200

1.PERFORMANCE PARAMETERS

Membrane material

Polyvinyl Chloride(PVC)

Molecular Weight Cut-off(MWCO)

80.000-10.000 Dalton

Inner and outer diameters of hollow-fiber

0.9mm/1.6mm

Membrane fiber type

Inside-out hollow-fiber

Charateristics of membrane structure

Hydrophilic double-compact layers

Dimensions of membrane module

200*1350mm

Area of membrane module

30m2

Pure water flux

8000L/H

2.APPLICATION CONDITIONS

Pre-filtration

50-150um

Max. turbidity of inlet water

<=15NTU

 Rate flux

60-160L/M/H 

Running mode

Cross-flow filtration or dead end filtration 

 Max.inlet water pressure

0.45MPa 

Pressure difference of transmembrane at 20°c(TMP)

 28-150KPa

Max.Pressure difference of transmembrane 

 0.2MPa

 

 Applicable PH range

 2-12

 Applicable temperature

 5°c

 Tolerable continuous residual chlorine

 100PPm

 

 

 Tolerable interval residual chlorine

 200PPm

3.BACKWASHING DESIGN

Backwashing pressure

0.25MPa

Backwashing flow

220-300L/M/H

Backwashing frequency

Every20-60 minutes

Backwashing time

30-60 seconds every time

Frequency of chemically enhanced backwashing(CEB)

Auto adding of additives in backwashing is recommended

Time of chemically enhanced backwashing(CEB)

30-60seconds every time

4.CHEMICALLY WASHING DESIGN

Frequency of chemically washing

every1-4months or when TMP is over0.15MPa

Pressure of chemically washing

0.15Mpa

Flow of chemically washing

200-250L/M/H

Time of chemically washing

60-90 minutees every time

Acid washing chemical

Citric acid or oxalic acid(mixed into solution with PH=2)

 Alkali washing chemical

NaoH (mixed into solution with PH=2)

 5.INDEX OF OUTPUT WATER

Turbidity of output water

<0.1NTU

Index of silt density

<1.5

Remarks:

1.Pure water flux is measured with pure water at25°c with inlet water pressure of 0.1MPa.

2.If water sources are from surface water,river water or well water and so on,pre-treatment shall be done.

It is suggested that a 50-150um precision filter shall be equipped to have inlet water with turbidity<=15NTU.

 Microorganism,pathogen

99.9%Removed 

 

 

 

 

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.