hot water meter,water flowmeter
anti-impurity,anti-sticky,no movable part,1.0%FS
6~4000mm,4~20mA
easy instal&operate
hot water meter (SBL target type),water meter,liquid meter
2008 Improved type target Flow Meter
SBL digital target flow meter is proprietary product independent created by our company, and is warmly welcomed by customers in the last past 10s years. It suit for market very much. After combine microcomputer optimization and structure rationalization, we launch grandly 2008 upgrade version in 2009, which has a wider adaptability,Higher reliability and wider flow range for target flowmeter:liquid measuring range can up to 1:200 times, gas can up to 1:100 times,steam can up to 1:30 times.in the past,our flow meter can resist temperature from -196°C~450°C.But now,can resist from -196°C~700°C.The minimum measure flow ,in the past is 50L/h,now 2L/h is ok for liquid.and the gas,in the past the minimum measure is 3m3/h,but now can measure 0.02m3/h.and the maximum pressure can up to 55Mpa.and We have a large inspection system to make sure our quality and accuracy
main technical indices | |||||||
Measured media | Liquid, gas, steam | ||||||
Nominal diameter | Pipeline type 15~300mm | Clamped mounting type 15~600mm | Inserted type 100~2000mm | ||||
Nominal pressure | 0.6~42MPa | 0.6~42MPa | 0.6~42MPa | ||||
Media temperature | -20~70oC (normal temperature type) -196~+700oC (high/low temperature type) | ||||||
Accuracy | ±0.2% | ±0.5% | ±1.0% | ±1.5% | ±2.5% | ||
Range degree | 1:10 | 1:15 | 1:30 | 1:100 (gas) | 1:15(steam) | ||
Compensation type | Temperature compensation; pressure compensation | ||||||
Repeatability | 0.1%~0.08% | ||||||
Power supply | Built-in 3.6V Li batter; external power supply of 24VDC; 220VAC (only for separate digital tube) | ||||||
Output forms | Site display reading; 4~20mA (2-wire system); pulse; 0~10V; RS232/RS485 (optional);HART PROTOCOL | ||||||
Measurement tube Material | Carbon steel; 304; 316L; also supplied to user requirement | ||||||
Explosion-proof sign | Intrinsically safe type (ExiallCT4); Explosion isolating type (ExiallBT4) | ||||||
Protection class | IP65; IP67;IP68 | ||||||
Note: Size of flowmeter flange shall execute GB/T9115.1~9115.4~2000 series standard. For pipeline type, small diameter flowmeter of DN6, DN8, DN10 etc. can be manufactured to user requirements.
Description
a. Connection flange shall execute relevant technical requirements in state standard GB/T9115.1~9115.4-2000.
b. All standard flanges from other countries (Japanese standard, USA standard and German standard etc.) are special order.
c. For high temperature type and temperature/pressure compensation type, in addition to pipeline flange, connection mode can be clamped mounting type, inserted type or threaded structure.
d. Jacket insulation type (heat conducting type) is suitable for applications in which preheating and thermal insulation, or process thermal insulation are required to eliminate media solidifying and crystallization during process flow. This type is normally used for viscous media such as modified asphalt and coal tar etc.
e. When media temperature in high temperature type flowmeter is >200, upside-down horizontal installation must be used for the instrument. For the purpose of design, sufficient installation space shall be considered.
f. In case media flow up-down or down-up, for ordering, please note: right view, left view (showing gauge head)
