UF and CMF system. Used in liquid/soild, liquid/liquid separation. water ultra filtration, pre-treatment before RO etc.
UF system CMF system application areas:
This systems can be used in waste-water being reclaimed, removing bacteria and purifying tap water, normal river water purification, pre-treatment for reverse osmosis (RO) systems, pretreatment for sea water desalination, purifying & recycling industrial waste-water, concentration and separation allied on chemical industries.
The advantages of PP membrane:
PP hollow fiber membrane is robust and long working time.
High & stable flux in continuous filtration.
Less rigorous raw water quality, produced water meet RO system requirements & enhances longevity.
The tech. data of the feed in water
The size of particle | ≤50um | BOD5 | ≤30mg/L |
Turbidity | ≤20NTU | CODcr | ≤50mg/L |
PH | 1-14 | Temp. | 4-40 |
Working pressure | ≤0.25Mpa | Max. pressure | ≤0.40Mpa |
The tech. data of permeated water
Microorganism remove out ≥99%
Turbidity ≤0.2NTU
SDI ≤2.5
The UF & CMF system can be designed tailoredly according to the amount and the quality of raw water.
The online back flushing with water/air can recover the flux rate of the UF membrane.
The UF or CMF system can be equipped automatically by PLC control panel.
