1) Rust proof
2) Deadens road noises
3) Provides a rubberized cushion against flying rocks and gravel
4) Seals off cracks

 Super Chassis Elastomer : This product can produce special protective cover quickly and effectively, its unique function of anti-rust and anti-corrosion make the rubber and metal complete isolate from water vapour and impact of sandstone, lessen noises greatly and especially apply to the underbody, luggage etc.The quality according to the professional demand of all major garage

 

Features:

Makes any car ride quieter

Deadens road noises

Seals off cracks and crevices

Provides a rubberized cushion against flying rocks and gravel

Offers excellent protection against rust and corrosion

Application

Fenders,gravel deflectors and fender skirts

Gas tank

Rock and splash panels

All other areas where corrosionis most likely to occur

Inside of back bumper

Underside of hood

Trunks

Flooring

 

Ingredient:

Asphalt  19-26%   hexane 8-15%    kaolin 15-22%   cellulose 6-9%

Toluene  12-15%   petroleum distillates:6-7%  VM&NAPHTHA 12-15%

 

Directions for use

1)Be sure that areas to sprayed are free of all dirt,grease and rust scale.Also make sure that the sureface is toroughly dry before application to ensure best adhesion and protection.

2)tighten body nuts and bolts

3)cover the rest parts(such as vent-pipe,engine,radiator etc,).rigorously.

4) shake this product well about 2 minutes before using,then open the cover of can and remove the seal,then fix the special designed spray gun onto the mouth.

5) spray in a slow steady stroke once across and back to obtain1/8 inch(3.2mm)coating thickness .hold the gun approximately 12 inches(30.5cm) away from the surface being sprayed.

6) air pressure to the gun should be 60-70psi(4.22-4.92kgf/cm2)

7)for better result ,three time of spray is needed.after the first time ,you should flatten and fill the cracks and caves with metal seal-gue,every interval should be not less than 15minuts.best noise insulation effect need more than 1.5mm thickness

8) the producet will be dry to touch in 2hours and will permit driving of the car within 4 hours depending on humidity and release of solvent.

 

Safety measure

Keep container tightly closed and in a well ventilated place.keep away from heat,keep away from sources of ignition-no smokingdo not breathe vapor.use only in well ventilated areas.avoid contact with the skin and eyesbetter have a trivial spray if you use the product first time to confirm the best operating method.5. keep away from childern.