Welcome to B2BAGE
850 SMD Rework Station Hot Air Welding Gun, Welding Torch.
850 SMD Rework Station Hot Air Welding Gun, Welding Torch.

Minimum Order: 0
Quality/Safety Certification: 0.00


850 SMD Rework Station Hot Air Welding Gun.
1)Power supply: AC 220V/50Hz
2) Power consumption: 280W
3) Paypal accepted

850 SMD Rework Station Hot Air Welding Gun, Welding Torch:

 

 

Product details
Feature
1) The closed-loop control sensors, temperature accuracy and stability, safe desoldering QFP, PLCC, SOP, BGA and other temperature sensitive components;
2) Intelligent cooling system, the work is completed off air after a delay, air temperature lower than 100 °C automatically cut off power supply;
3) the use of imported heating wire, heating up fast, long life, welding safety performance, adjustable temperature constant;
4) the use of imported air pump, low vibration, noise-free design and maintain a quiet working environment;
5) Anti-static design, prevent leakage and damage due to static electricity and the PCB board.

Technical parameters
Power supply voltage: AC 220V/50Hz
Power consumption: 280W
Flow types: diaphragm pump dedicated
Gas flow rate: 23L/min (max)
Temperature adjustment range: 100 ~ 480 °C
Display: mechanical scale
Handle length (including handle line): 120cm
Noise: <40dB
Nozzle: A1130, A1170A
Heating core: import heating wire (550W) 220V
Dimensions: 224 × 126 × 110 (L × W × H) mm
Weight: about 3.2K

Packing List (purchase, please check the packaging to confirm the list of items listed is correct.)
1) Device Host: 1 set
2) Handle components: a set of
3) Handle frame: 1
4) Manual: 1
5) nozzle: 2 (diameter 5mm and 8mm)
6) Warranty card: 1

Use
1 temperature setting
 Adjust the temperature setting knob to set temperature.
 LED flashes, indicating that the body heat in the heating.
2 air conditioning
Size of the object according to welding, flexibility in adjusting the air flow.

Safety Code
Before using the hot air gun, the following basic measures must be observed to avoid electric shock or damage to life or cause a fire and other hazards. In order to ensure personal safety, you must use approved or recommended by the original parts and accessories, otherwise it will lead to serious consequences! Must be by a qualified electrician or factory designated service personnel!
1) Be careful, high-temperature operation, not flammable and explosive gases in the past, the object is used near the nozzle and spray the hot moxibustion are very hot and can burn the body, do not touch the heating or hot air injection tube body.
2) The hot air gun is turned on, do not leave their jobs.
3) Do not allow children access to hot air gun.
4) Install the nozzle can not be turned on in the hot air gun, heat pipe and the nozzle must be cooled in order to install.
5) Keep forward, the air flow, can not have obstructions.
6) when the hot air gun to erect, keep the bottom clean and smooth.
7) use, remember to cool the body, and a safe place, turn off power after a short heat pipe will be automatically ejected lump, this cooling period, do not unplug the power plug.
8) does not use long, should unplug the power plug.

 

Other motherboard repari tools we can offer:

 

 

 For More Items, Please feel free to contaact us.

Address: Huifuge28A, Caifu Building, Huaqiang Center, Futian District,Shenzhen,China
Contac name: Huang Ling
tel: 86-755-83132967      
mobile: 86-13760409969
fax: 86-755-82941634

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.