3D wheel alignment (Four wheel alignment CE)
Move the car within 20cm,computer can calculate all the parameters within 1 min
wheel balancer/ 3D wheel alignment/Four wheel alignment CE
Basic Functions:
Parameters measurement such as camber, Caster, Kingpin inclination, Toe-in & Toe-out
Features:
1. 3D cameras alignment based on the car and not influenced by the platform.
2. Measurement system equipped with double digital cameras and four target disk, supplying revolutionary measurement mode.
3. There is no electronic component, so the wheel alignment will not have a component failure problem.
4. Equipment Calibration - once calibration before delivery, workable immediately after installation, no need for periodic calibration
5. Measurement progress no need to compensate for steel ring, the precise eccentric compensation will be just once pulling or pushing the car back and forth
6. Software system Easy to operate, complete conventional basic parameters within two minutes, significantly faster than conventional aligners
7. Easily maintenance, download and upgrade freely for the model data
Model: SX-G6T
Measurement project | Accuracy | Measurement range |
Display accuracy | 1´/1mm | |
Camber | ±2´ | ±10° |
Caster | ±6´ | ±20° |
Kingpin Inclination | ±6´ | ±20° |
Toe-in & Toe-out | ±2´ | ±20° |
Set back | ±2´ | ±5° |
Thrust angle | ±2´ | ±5° |
Wheel Deviation | ±2mm |
|
Axis Deviation | ±2mm |
|
Basic Functions:Parameters such as camber, Caster, Kingpin inclination, Toe-in & Toe-out
1. Axis deviation measurement
2. Wheel deviation measurement
3. single-round measurements
4. the vehicle lift measurement function
5. steering wheel adjustment
6. check the horizontal of the lifting platform