Allotypic Wood Engraver
1.important ballscrow, linear square orbit
2.Italy air cooling spindle
3.vacuum suction
4.DSP contr
Allotypic Wood Engraver HD-2030
Technical Parameters
Model | HD2030 |
XY working area | 2000*3000mm |
Z working area | 200mm |
Table size | 2180x4000mm |
Max feeding | >25m/min |
Work-holding | By suction |
Processor | DSP/Frequency 100MHz |
Interface | USB |
Command | G code*.u00*.mmg*.plt |
Surroundings for software | DSP |
Power(not include the spindle) | 2500W |
Power | AC380V/50Hz |
spindle rotating speed | 0-18000rpm/min |
Drive motor | stepper |
Standard Features
1.Whole cast iron stucture, three axies imported square orbits,
2. imported ballscrew, three axies dust proof, water proof,
3.4.5kw imported bearing Italy air cooling spindle,
4.Taiwan made inverters, fully shielded, uneasy distorted cable,
5.U flash disk DSP control system, wentai software, type3 software,
6.20 cutters(φ3.175, φ4, φ6), 3 collets
1.Whole cast iron stucture, three axies imported square orbits,
2. imported ballscrew, three axies dust proof, water proof,
3.4.5kw imported bearing Italy air cooling spindle,
4.Taiwan made inverters, fully shielded, uneasy distorted cable,
5.U flash disk DSP control system, wentai software, type3 software,
6.20 cutters(φ3.175, φ4, φ6), 3 collets
sample:
