cnc waterjet cutting machine
1,quality and service are best
2,Only three kinds of wearing parts
3,imported USA technology
cnc waterjet cutting machine
Waterjet CUX400 major components list | |||||
Parts name | Unit | Quantity | specifications | Manufacturer | |
High pressure generator | |||||
Pump motor | Peace | 1 | YYB200L | Nantong Wangao | |
Pump | Peace | 1 | 63SCY14-1D | Shanghai | |
Hydraulic system | Set | 1 |
| Huade | |
Reversing switch | Peace | 2 | P20 | Switzerland | |
High-pressure cylinder | Peace | 2 |
| Imported from USA | |
One-way valve connector | Peace | 2 |
| Imported from USA | |
Check Valves | Peace | 2 |
| Imported from USA | |
High-pressure spool | Peace | 2 |
| Imported from USA | |
High seat | Peace | 2 |
| Imported from USA | |
High Springs | Peace | 2 |
| Imported from USA | |
Low-pressure valve cover | Peace | 2 |
| Imported from USA | |
Low-pressure spool | Peace | 2 |
| Imported from USA | |
Piston rod seal | Set | 2 |
| Imported from USA | |
High-pressure dynamic seal | Group | 4 |
| Imported from USA | |
Sand pipe | Peace | 1 | 6.35*1.02 | Imported from USA | |
Gem nozzle | Peace | 1 | 0.3 | Domestic | |
Control system | |||||
CNC system | Set | 1 | 320W | Washing | |
Servo motor | Set | 1 |
| Wuhan huada | |
Machine | |||||
Ball screw | Set | 1 | 50,25 | Taiwan PMI or HIWIN | |
Linear guide | Set | 1 | 30,20 | Taiwan PMI or HIWIN | |
Machinery running costs
Item | Consumption | Lifespan | Unit price | Cost assessment | Note |
Water | 3.7L/min |
|
| RMB 32 /hour | Water and electricity |
Electricity | 30-35kw/h |
| RMB 0.78/kwh | ||
Sand | 12-15kg/h |
| RMB 600/T | RMB 9/hour |
|
Gem spray |
| 40 hours | RMB 40/peace | RMB 1/hour |
|
Sand spray |
| 100-150/hour | RMB 720 /peace | RMB 6.8/hour |
|
High pressure seals |
| 1000 hours | RMB 500 /set | RMB 2/hour | 1set |
Total |
| Up to |
| RMB 50.8/hour |
|
1. CUX400 High pressure generator maximum pressure up to 400Mpa.
2.Only three kinds of wearing parts:High pressure seals,water switch,Mixing chamber,all are imported parts and long life.
Cutting parameter as followed:(for reference)
Material | Thickness | Cutting speed |
Iron plate | 5mm | More than 450mm/min |
Steel | 10mm | More than 250mm/min |
Glass | 12mm | More than 800mm/min |
Marble | 20mm | 600-1200mm/min |
Granite | 20mm | 400-1000mm/min |
Note: The above parameters according to different the material hardness, cutting accuracy and surface to adjust system parameters and the cutting speed and cutting pressure to achieve the best cutting.
