A.Our Factory was Established in 1970s.
B. PELLET MILL.PRODCUTION LINE
C.Newly exported to Costa Rica, The Philippine.

Complete wood pellet line Description:

This line can make the pellet with straw, stalk, thin wood chip, etc. It is a complete set, including hammer mill, dust collector, mixer, hoist, pelletizer, bucket elevator, cooler and conveyor, power box, etc.

This Line is a turn-key factory, which is installed in one container when leaving the workshop.

Model: 9CK-300C

Capacity: 600kg-800kg/h

Power for whole line: 37.7kw

Dia of pellet: 6mm/8mm

Density: >1.1

G. W.: 1970kgs 

Product Description

1. Crushing Process:
Depending on the different input material, we fit out the suitable Crushing machines. The BX-Series Combined Chipping and Crushing Machine is used for the raw Log with diameter 200mm; SFSP series Hammer Mill is widely used to crush each kind of straw, wood chip, tree branch, bark and leftover bits from agricultural wastes. The best moisture content in the Crushing Process is less 20%, and the thickness of the wood chip is less 5mm.
2. Drying Process:
The best moisture content to pelletizing is about 14-16%. Our new Air-Current Rotary Dryer is made up of Burning Stove and Main Rotary Dryer, which can realize to reduce the moisture from 50% to 10%, and save about 30% energy consumption comparing the old Rotary Dryer. Our burning stove is fueled by coal and wood material, which can save electricity consumption largely. If the users want to use the other fuel such as gas and electricity, one Burner is necessary, but the extra cost will be charged
3. Pelletizing Process
Wood Pellet Mill is the most important equipment,
4. Cooling Process:
After the pelletizing process, the temperature of the wood pellet is about 60-80 degree, and the moisture content of the wood pellet is about 15%, so we need use Cooler to reduce about 3-4% moisture, such this the wood pellet is easy to store
But considering the feedback from some foreign clients, the local climate is very humidity; They hope to cool the wood pellet with moisture 7-8%. In order to satisfy the different need from different clients, we develop one kind of new Stabilizer Combined Cooler
5. Packing Process:
After cooling, the wood pellet will not directly enter into the fuel process, avoiding the wood pellet affected with damp. The packing process is necessary. In this process, we assemble our domestic best Semi-Auto Packing Machine to you.