Auto Feeding and Blanking Nesting CNC Router Wood Cutter From www.eaglecnctec.com Jinan EagleTec CNC Machinery Co.,Ltd. Auto feed nesting cnc router EagleTec-1325AL2 is the latest cnc router special for panel wood sheet cutting purpose. It is a combination of cnc router 1325 and auto feeding systems. Auto feeding system contains two parts, auto loading before cutting and auto unloading after cutting. Design of auto feeding can save 50% labor source for you; using nesting software will reduce time cost greatly on programming and improve the material utilization to max extent. The both elements are the latest technology of cnc wood cutter that is very suitable for panel furniture production. Application For plate fitment specially: cabinet cutting, cabinet door engraving and milling Machining Capacity Cutting, Engraving, Milling, Slotting Main Configuration 1) Origin Italy HSD 6.0KW air cooled spindle 2) Auto feeding and blanking system 3) Taiwan SYNTEC controller 4) Delta or Yaskawa servo pack Features 1) High automation combination of auto feeding and nesting software to reduce time cost on material loading, unloading and programming; reduce money cost by improving the utilization of raw materials as max. extent. 2) This is an affordable nesting cnc router for your production, high-end Nesting CNC wood cutting machine also available to meet the clients who has high request on configuration. 3) Locating cylinder to locate the material sheet accurately as soon as it reach to working table. Technical Parameter Stroke | 1300×2500×230mm Controller | Taiwan SYNTEC Repositioning | ±0.002mm Resolution | ±0.0025mm Spindle | Italy HSD air cooled 6.0KW, 6000-18,000 rpm Max. Travel speed | 60m/min Max. Cutting speed | 25m/min Driving motor | Yaskawa or Delta Linear guide | Taiwan HIWIN origin Vacuum Pump | Water-ring, with flow rate 230CMB/h Machine frame | Common type Electronics | Omron, Schneider, CHINT Weight | 2000KG