Relief engraving machine JCM1325
1.Square rails on XYZ
2.8A big drivers four sets
3. CE
Relief engraving machine JCM1325
Features :
Applicable to cut on wood, solid wood, MDF, acrylic, and PVC and etc . This features for higher speed, deep cutting, and high working efficency .
The machine all adopt Import good brand parts, vaccuum table surface are sperated by 6 zones, which is helpful for the small work pieces or big work piecs holding instead of clamps .
Seperate control cabinet holds all electronic parts. Handheld dsp controller really very easy to operate , reading G code, mini step 0.001 mm
Parameters :
X,Y Working Size | 1300x2500mm |
Gantry height | 200 mm |
Max air run speed | 32m/min |
Max.working speed | 15m/min |
Resolution | 0.005 mm |
Repositioning Accuracy | <0.05 mm |
Available format | G code *.U00*.mmg*.plt |
Spindle Power | 3.0kw aircooling |
Spindle Rotating Speed | 0-18000rpm/min |
Transmission | Stepper |
Mechanic Transmission | Hiwin Linear Square rails on XYZ, Gear Rack and pinion on XY, Ball screw rod on Z |
Table surface | Vacuum holding down surrface 3- 6 zones |
Frame | Welded Tubular Steel / Cast iron uprights |
Machine Gross Weight | 1000KGS |
Machine comes with Dust colletion system and vac uum pump 7.5 kw
- Good spindle
-Manual oil lubrication for bearings