|
Application:
HPC series cone crusher with high-efficiency and hydraulic pressure was widely used in mining, concrete factory, sandstone making, etc. The machinerys pressure resistance strength is under 350Mpa. And they are widely suitable for primary crushing of many kinds of mining and rock such as many kinds of ores, concrete, fireproof material, bauxite, quartzite, corundum, perlite, ironstone, basalt, etc.
Features and Benefits :
1.The new series of HPC cone crusher with high-efficiency and hydraulic pressure equipment is adopted three protecting equipment such as protecting oilcan, locking oilcan and hydraulic driving oilcan. They not only protect the machinery, but could deal with troubles without disassembly the parts.
2.The equipment also can adjust the size of final material. The machinery with high dependability operated very expediently.
3. The crushing chamber specially designed according to particles sink principal and its matching speed can sharply increase the crushing ratio, output and content percentage of cubical product in final crushed material.
4. In the special circumstances such as irons was feed into the crushing chamber together with the materials and there is a jam in the crushing chamber, the hydraulic equipment could open the cover automatically, then the products could output successfully. It greatly reduced the trouble of stopping the machine to output the products artificially. Which makes the maintenance more convenient and with low cost.
5.It is adjusted by hydraulic device and lubricated by the dilute oil. And with locking sleeve assembly, it can overcome the trouble of oil and water being mixed together.
6.The concave and mantle made by high manganese steel. Owing to the change of the concaves style and the protect of the crushed products, The abrasion of the machine is reduced greatly and can last long compared with the old cone crusher.
HPC-160,HPC-220,HPC-315,HPC-400
Model: HPC-160
Cavity (coarse/fine): C,F
Discharge setting min.(mm): C,13; F,6
Feed opening(mm): C, 150; F,76
Capacity(t/h): C, 120~240; F, 55~180
Power(kw): 160
Weight(t): 13
movable cone diameter(mm): 950
Model: HPC-220
Cavity (coarse/fine): C,F
Discharge setting min.(mm): C,13; F,16
Feed opening(mm): C, 225; F, 86
Capacity(t/h): C, 150~430; F,90~260
Power(kw): 220
Werght(t): 18
movable cone diameter(mm): 1160
Model: HPC-315
Cavity (coarse/fine): C,F
Discharge setting min.(mm): C,13; F,6
Feed opening(mm): C,290; F,100
Capacity(t/h): C, 190~610; 108~320
Power(kw): 315
Werght(t): 26
movable cone diameter(mm): 1400
Model: HPC-400
Cavity (coarse/fine): C, F
Discharge setting min.(mm): C,13; F,6
Feed opening(mm): C, 320; F,110
Capacity(t/h): C,230~700; F, 145~430
Power(kw): 400
Werght(t): 33
movable cone diameter(mm): 1500
Note: This specification is just reference, any changes are subject to the products.
|
How Search？ 
