RTV Gasket Maker
Silicone Gasket Maker
Gasket Maker
Hi-Temp Gasket Maker Manufacturer/Factory
PRODUCT DESCRIPTION:
SBOND Hi-Temp RTV Silicone Gasket is a singlecomponent, room temperature vulcanizing gasketing (RTV) compound designed to provide reliable “formed-in-place” gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. Designed to maintain maximum performance in a continuous temperature environment of 600°F.
PRODUCT BENEFITS | TYPICAL APPLICATIONNS |
High temperature use | Drive housings |
Superior adhesion and flexibility | Exhaust manifolds |
Replaces most cut gaskets | Thermostat housings |
Can be used as a gasket maker or dressing | Valve covers |
Easy application | Timing gear covers |
Non-flammable | Water pumps |
Non-toxic | Differential covers |
DIRECTIONS FOR USE:
For assembly as a form-in-place gasket
1. Remove all previous material from mating surfaces. SBOND Gasket Remover is recommended for most materials, not for plastics or painted surfaces.
2. For best results, clean and dry all surfaces with a residue-free solvent, such as SBOND Brake and Parts Cleaner.
3. Cut nozzle to desired bead size, 1/16“ to 1/4“ in diameter. An 1/8” bead is usually sufficient for most applications.
4. Remove cap, puncture tube or cartridge seal and attach extension nozzle.
5. Apply a continuous and even bead of silicone to one surface, first tracing the internal areas of the gasket configuration, then all surrounding bolt holes a shown.