1.Fiberxon sfp FTM-9712S-SL20
2.Brand New and 100%genuine
3.Good Price and huge stock
Fiberxon SC Receptacle SFP GE-PON OLT Transceiver FTM-9712S-SL20
(IEEE 802.3ahTM-2004 1000Base-PX20-D)
FeaturesSingle fiber bi-directional data links with symmetric 1.25Gbps upstream and 1.25Gbps downstreamIntegrated with micro-optics WDM filter for dual wavelength Tx/Rx operation at 1490/1310nm1490nm continuous-mode transmitter with DFB laser1310nm burst-mode receiver with APD-TIAOptical isolator built in for extreme Return Loss toleranceResetless burst-mode receiver designSupport more than 24dB dynamic range0 to 70°C operating temperature (S-SL20) -40 to 75°C operating temperature (S-SL20E)Spring-latch SFP (Small Form-factor Pluggable) package with SC receptacle optical interface.Detailed product information in EEPROMDigital diagnostic interface compliant with SFF-8472 Rev 9.4Single 3.3V power supplyMaximum 1W total power dissipationLVPECL compatible data input/output interfaceLVTTL transmitter disable controlLVTTL transmitter laser failure alarmLVTTL receiver Loss Of Signal(LOS) indicationLow EMI and excellent ESD protectionClass I laser safety standard IEC-60825 compliantRoHS compliance (S-SL20G and S-SL20EG)
ApplicationsGigabit Ethernet Passive Optical Networks (GE-PON) – OLT side
StandardCompliant with IEEE Std 802.3ah™ -2004Compliant with FCC 47 CFR Part 15, Class BCompliant with FDA 21 CFR 1040.10 and 1040.11,Class ICompliant with SFF-8074i Rev 1.0Compliant with SFF-8472 Rev 9.4
FTM-9712S-SL20(E)(G) is Optical Line Terminal (OLT) compliant with IEEE 802.3ah™-2004 1000BASE-PX20 application.
The transceiver is the high performance module for 1.25Gbps data link in single fiber by using 1490nm continuous-mode transmitter and 1310nm burst-mode receiver. The transmitter section uses a multiple quantum well 1490nm DFB laser and is Cass I laser compliant product according to international safety standard IEC-60825. The receiver section uses an integrated 1310nm APD (Avalanche Photo Diode) and preamplifier mounted in an optical header and limiting post-amplifier IC. Unlike the conventional burst-mode receiver, the receiver does not require reset pulse to receive optical data packets with different optical power.
The optical output can be disabled by LVTTL logic high-level input of TX Disable. TX Fault is provided to indicate that degradation of the laser. Loss of Signal (LOS) output is provided to indicate the loss of an input optical signal of receiver.
Enhanced Digital Diagnostic Monitoring Interface (DDMI) compliant with SFF-8472 Rev 9.4 has been incorporated into the transceivers. It allows real time access to the transcevier operating parameters such as
transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage by reading a built-in memory with I2C interface. For further information, please refer to SFF-8472 Rev 9.4.
Shipping and delivery
The warranty is voided when damage is caused by:Improper handling, neglect or failure to operate the product following the directions provided.An outside force beyond the control of PROSFP (eg. flood, fire).Any repair or opening of the product by the dealer or end-user.