Welcome to B2BAGE
SBL digital lpg /oil/dsaturated steam/ethano flowmeter
SBL digital lpg /oil/dsaturated steam/ethano flowmeter

Minimum Order: 0
Quality/Safety Certification: 0.00


1.liquid,oil,gas hc4 gas analyzer RS485output
2.Accuracy:0.2 -1.5%
3.Repeatability:0.05%~0.08%
4.plug-in Caliber:DN300-3000mm

SBL digital target gas flowmeter hc4 gas analyzer

Characteristics

l      Measurement flow of liquid, gas, steam, ropy mediums or ambulatory mediums in low, normal or high temperature condition.

l      No movable part, safe and reliable.

l      Wide measure range, bigger than 1:30.

l      Able to adopt hang weight method to test the flow meter.

l      Measurement range can be changed by replacing target according to need.

l      LCD display.

l      4-20mA, 0-10V, impulse, and RS485 outputs.

Easy installation and maintain

 

SBL Digital Display Target Mode Flow meter has several types and categories as follow:

1) Type

l         Pipe Type:  550 Prick Screw Type, spec: DN15~DN50

           Whole Flange Type, spec: DN15~DN300

l         Clamp Type, spec: DN15~DN600

l         Plug Type, spec: DN150~DN1500

2) Category

l         Liquid: high and normal temperature

l         Gas: high temperature steam and normal gas

(The details are included in “Guide to Select SBL Digital Display Target Mode Flow meter ”.)

 

          Item                        Performance, Parameters

Caliber

DN65-3000mm

PN

0.6 --- 42MPa

Condition Temperature

-200 ~ +500

Accuracy

±0.2  ~  ±1.5%FS

Repeatability

0.1%  ~  0.08%

Media temperature

-20  ~ +70 (normal temperature type)
-196 ~  +700 (high/low temperature type)

Measure Ratio  

110

Enclosures

Carbon steel; stainless steel (or by user request consultations provided)

Power Supply

Built-in 3.6VDC Li-ion battery (can use for two years  without signal output); external supply 24VDC (with the signal output)

output  signal

4 ~ 20mA-wire system; Pulse 0 ~ 1000HZ; RS232/RS485 (or by user request consultations provided)

Protection Level

IP65   IP67

Explosion mark      

ExiallCT4 or ExdllCT4

Executive Standard

Q/BET05-06

Display

Cumulative flow; instantaneous flow; working conditions temperature; working condition pressure (temperature and pressure compensation type only); the percentage of full-scale bar; fault self-test

Connection Flange

Connection Flange: GB (GB / T) series; Chemicals (HG) series; Machine (JB / T) series; can also produce according to customer requirements in consultation

Features

* Installation is simple and convenient, easy to maintain

* A variety of output forms, spread far and wide variety of parameters

* Anti-vibration is strong, within a certain range can be measured pulsatile flow

* Anti-jamming, anti-contamination ability to exceptionally strong

 

Ads by Google



About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2022 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.