mould temperature controller
1: Taiwan pump
2:Schneider eletrical appliances
3:P.I.D temp control
4:Multi securities
Oil-type microprocessor plastic mould temperature controller
Standard oil -type mold temperature controller use thermo-oil as the heat transfer medium, and process for heating up to 200°c under direct cooling method. It is an indispensable device for the plastic processing.
Main Features:
1: Excellent heating performance:
• High capacity Taiwan pump from 0.5HP/0.37KW to 2HP/1.5KW
• Hongkong stainless steel heater from 30°C to 90°C.
• leak-proof cast tank in stainless steel
2: Good controlling temperature system:
• Schneider brand electric appliances
• P.I.D controlling system can control temperature precisely to ±0.5°C
3: multi-security devices:
• Protective for motor overload, shortage of water, overheat, abnormal circumstance,etc.
4: automatic water-supply and air-exhaust devices keep pump and heater in safer operation condition
Technique parameters:
model | JB-MO-06S | JB-MO-09H | JB-MO-12H | ||
heating medium | thermal oil | ||||
temperature range | 45-200°C | 45-250°C | |||
heating capacity/KW | 3 | 6 | 9 | 9 | 12 |
pump power/KW | 0.37-0.75 | 0.75-1.5 | |||
Maximum pressure | 2.5kg/cm² | 3.5kg/cm² | |||
TVU flow | 50L/min | 90L/min | |||
cooling method | indirect cooling | ||||
tank volume | 10L | 16L | |||
Dimension | 660×250×550mm | 660×250×550mm | |||
Net weight | 46-53KG | 64-68KG | |||
Power supply | 3phase-380v-50hz |