12V / 24V Pure Sine Wave Power Inverters
1 DC input voltage 12V /24V DC
2 Output voltage 220 AC
3 Size :350(L)*198(W)*78(H)mm

12V 24V Pure Sine Wave Power Inverters
SPECIFICATION
MODEL MP-12-1200
Power Inverter 12VDC to 220VAC(1200W)

The Inverter is an electronic device which converts 12 Volt DC voltage from a battery or other source to 220 Volts household AC power.

IINPUT PROPERTY
1 DC input voltage 12V DC
2 DC input voltage range 11 to 15 V DC
3 Low battery alarm 10.5V DC +- 0.2V DC
4 Low battery shutdown 10.0 V DC +- 0.2V DC
5 No load current draw <0.6 A DC
6 High voltage shutdown 15.0V DC +-0.2V DC
7 Fuse (internal) 40AX5 (MAX) Replaceable
8 Input reverse protection Blow fuse

OUTPUT PROPERTY
1 Output voltage 220 AC (RMS) +-3%
2 Output frequency 50Hz & 0.3Hz
3 Output wave form Pure sine wave (+- 3%)
4 Continuous output power 1200W
5 Overload output power 1300W +- 40W
6 Surge capacity (Peakower) 2400W

GENERAL CHARACTERISTICS
1
2 Efficiency (except power loss on the wire) >90% Full load
3 Over load protection Yes RED LAMP LIGHT, FOUR SPEAKER ALARMS
4 Short circuit protection Yes RED LAMP LIGHT, FIVE SPEAKER ALARMS
5 Over temperature shutdown 65D& 5D RED LAMP LIGHT, FIVE SPEAKER ALARMS
6 Operating temperature range -5-40D
7 Storage temperature range -20-50D
8 Operating relative humidity 10%-90%
9 Storage relative humidity 5%-95%

III MECHANICAL CHARACTERISTICS
1 Dimension 350*198*78 mm L& W& H
2 Net weight 3.0KG
3 Outlet CP2
4 Connector DC cable
5 Cool mode By fan