DC to AC 500W Pure Sine Wave Power Inverter
1 DC input voltage 12V/24V DC
2 Output voltage 220 AC
3 Size :210(L)*98(W)*55(H)
DC to AC500W Pure Sine Wave Power Inverter
SPECIFICATION
MODEL MP-12-500
Power Inverter 12VDC to 220VAC(500W)
The Inverter is an electronic device which converts 12 Volt DC voltage from a battery or other source to 220 Volts household AC power.
IINPUT PROPERTY
1 DC input voltage 12V DC
2 DC input voltage range 11 to 15 V DC
3 Low battery alarm 10.5V DC & 0.2V DC
4 Low battery shutdown 10.0 V DC & 0.2V DC
5 No load current draw <0.6 A DC
6 High voltage shutdown 15.0V DC& 0.2V DC
7 Fuse (internal) 40A× 2(MAX) Replaceable()
8 Input reverse protection Blow fuse
OUTPUT PROPERTY
1 Output voltage 220 AC (RMS) & 3%
2 Output frequency 50Hz 0.3Hz
3 Output wave form Pure sine wave(&3%)
4 Continuous output power 500W
5 Overload output power 550W 20W
6 Surge capacity (Peakower) 1000W
GENERAL CHARACTERISTICS
1
2 Efficiency (except power loss on the wire) >90%Full load
3 Over load protection Yes RED LAMP LIGHT, FOUR SPEAKER ALARMS
4 Short circuit protection Yes RED LAMP LIGHT, FIVE SPEAKER ALARMS
5 Over temperature shutdown 65D&5D RED LAMP LIGHT, FIVE SPEAKER ALARMS
6 Operating temperature range -5-40D
7 Storage temperature range -20-50D
8 Operating relative humidity 10%-90%
9 Storage relative humidity 5%-95%
MECHANICAL CHARACTERISTICS
1 Dimension 210*98*55mm L&W&H
2 Net weight 1. KG
3 Outlet CP2
4 Connector DC cable
5 Cool mode By fan