CNC lathe machine
10 years Machine Tool Experience
Stable,high efficiency and accuracy
CK-50
English Controller
CNC lathe:
CK-50 is with indivisual spindle can support strong cutting and with high accuracy.
| CK-50 | ||||
| Positioning accuracy | mm | 0.015 | ||
Repeatedly Positioning accuracy | mm | 0.003 | |||
Ellipticity | mm | 0.005 | |||
Machining roughness | μm | Ra1.6 | |||
| Spindle bore | mm | Φ82 | ||
Spindle inside taper |
| 1:20 | |||
Spindle mount |
| A2-8 | |||
Spindle speed range | rpm | 2200 | |||
Electric Power of spindle | kw | 7.5 | |||
Power supply | Enter power |
| 50 Hz 380V | ||
Machining Range | Diameter over bed(max) | mm | 500 | ||
Diameter over support(Max) | mm | 300 | |||
Maximal machining length | mm | 750/1000 | |||
Width of lathe bed | mm | 400 | |||
| Number of tool stations |
| 4(6 or 8 available) | ||
Repeatedly Positioning accuracy | mm | 0.003 | |||
| Tailstock sleeve insider taper |
| NO.4 | ||
Maximal stroke of the tailstock sleeve | mm | 150 | |||
Diameter of tailstock sleeve | mm | Φ75 | |||
Dimensions and net weight | Dimensions of lathe tool (L x B x H) | mm | 2600 1450 1900 | ||
Net weight | kg | 2500/2600 |
Specification:
1)Entire Optimization: This series of machine lathe is entirely optimized on the base of the precious plain lathe and individual main axis lathe, with better performance, much more beautiful and practical.
2)Easily upgraded: the imported bearing with high accuracy and high speed can be selected and assorted, the machining accuracy and the efficiency can be upgraded directly, the coupling port for the back-up motive chuck, the high-speed and low-noise leather belt can be selected and employed.
3)Advanced structure: lathe apron and the dragging board is lengthened and stuck with plastic, slight capacity feeding is accurate, the accuracy is kept permanently. All in one of lathe foot(CK-50 is segregation), with intensified stability and rigidity, with convenient hoisting and installation and with compact and generous structure;
4)Setting on the upper side for the main motor, the main motor is installed on the lathe leg, the short transmission leather belt facilitates the high speed and low noise, easily installed and maintained, easily change the power ( variable frequency and AC servo)