AAC block cutting machine
1.Energy saving 50%
2.fast cutting cycle:4 min/mould
3.capacity:10 to more than 20 cubic meter/year

Prosessional Cutting machine

~ Professional Cutting machine simple introduction:

The cutting machine is one of the main equipments of the AAC production line .The annual output of  the AAC producting line is over 50000 cubic meters,cutting machine is a necessary equipment which increase the efficency and the product quality.
 

~Professional Cutting machine working principle:
Aerated concrete cutting machine works: adobe aerated concrete units with bottom plate into the turn after moving to the cutting machine to a small slide, 90-degree turn after the green body by the small slipway will move to the cutting position, the first of surrounded by the green body to the level of cutting, making vertical cuts. After cutting a small slip by the green body to flip mobile station, the green body to the opposite direction 90 degrees counter-reversal stage. The whole process is done automatically.

~Professional Cutting machine advantages:

1).the green body of lifting the center of gravity and center of gravity coincides with the semi-spreader, lifting will not make the green body to tip, that is grouped in the green body into the kettle, the steam curing car does not require any auxiliary support device
(2).cutting down through the mixing of 100% waste recycling purposes.
(3). the kettle has a semi-spreader, the product can be directly sub-stack, loading, but also to keep a car direct steam crane to enter online.
(4). the six sides of the green body to cut. Products, precision can reach GB/T11969-1997.
(5). plate production to meet the requirements of precision products up to GB15762-1995

~Professional Cutting machine technical target