1.270 channels
2.Step fire
3.sequential fire
3.Each channel could fire 20-30pcs
Waterproof Firing System
1. 270 channels
2. Step fire and sequential fire.
3. Each channel could fire 20-30pcs.
Waterproof Firing System
Item DE270-A firing system worked by 220v/110v AC, which has the “test”function. Each channel could fire 20-30pcs igniters. This system has the function of "Salvo fire""sequential fire”and ”step by step fire”. Time range for sequency is from 0.1-9.8 seconds. Moreover, “step by step fire” could alternate with “sequential fire”. It is divided into 9 parts. 10 channels for each part. The controller is with 9pcs receivers and 300m cables. You could select the length of the cable according to your requirment.
Connet & Test
1. Pls put the power plug of firing system into 220V/110V AC.
2. Pls turn on the power switch, then move the button to “test”position. If the power lamp light and time table shows:9.9s.
3. It indicates the system is in good condition.
4. Pls connet the products into black & red clip. Pressing the button on the machine or the remote one By one .If the “test”lamp also bright one by one , it indicates the products are connecting well.
Pls move the button to “fire”position, then you can fire.
Step & sequential fire
1. Step fire -After the electric power connecting well, pls select the parts that need to be fire step by step. Then pls press the button:1.2.3…10 on the controller. The system will fire one by one. And the digital table could record display time of each channel. According to this , you could adjust the interval time of the channles for your display.
2.Sequential fire- When you press “time”button one time. Time for sequential will add 0.1s. It will add accordingly if you press over and over.
Sequential one by one - After you select the right interval time, pls move the parts which need to be sequential to the “on”position. When you press the “rapid”button , the selected parts will sequential fire one by one .
Several parts sequential together- First , you have to buy several receivers which has the parts that you need to fire together. For exampls, if you need to make 3 channels fire together, and you choose D,E,F as the sequential parts. Then you have to buy two extra receivers with D,E,F parts. After you select the right inverval time, pls move D,E,F to the “on”position. At this time, pls press the “rapid”button. Then D,E,F parts on the three receivers will sequential fire together.
3. After sequential fire, the right side of digital table shows the channel number that already fired. (what it show is the number of step sequential, not the together sequential. )
Waterproof Receiver
