co2 controller with temp.&RH%
Tongdy [China]
Model No: F2000IAQ-CO2-30XX/50XX
Place of Origin: Beijing,China
Brand Name: Tongdy
Packaging: Full and firm package
Minimum Order: 100pcs
Quality/Safety Certification: CE
¨ Features
u Multiple functions and high performance with low prices
u Wall mounting type and duct type selectable
u LCD display detecting both CO2 level and temperature, also relative humidity (optional)
u NDIR infrared CO2 module inside with special ABC Logic Self Calibration System. It makes the CO2 measurement more accurate and more reliable in use.
u 15 years lifetime of CO2 sensor
u Microprocessor control, quick response, high precision
u Provide up to three 0~10VDC outputs or relay dry contact outputs, or up to three mix outputs.
u The analog output with two alternatives: linearized over full range output or PID control output
u Different control mode for delays can be selected by user’s application, for example for ventilation or for greenhouse or other applications.
u Locale adjustable range of CO2: 0~20,000ppm or 0~50,000;
u Modbus RS-485 communication interface optional, 15KV antistatic protection, independent base address setting
u CE-Approval
¨ Application
F2000IAQ-CO2 monitor/controller is used to monitoring and control room CO2 level, as well as room temperature and humidity, provide one or two or three 0~10VDC analog outputs and up to three dry contact outputs . F2000IAQ-CO2 can be as a programmable logical controller to control CO2 level, temperature or humidity, and also as a transmitter DDC/PLC controller or other automation systems. It provides a RS485 communication interface with an independent address to PC or other control systems.
u Hotel, exhibition hall, hospital, shop, restaurant, air port, train station, theater and other public places
u House, villa, office, meeting room, classroom and other places
u Greenhouse, mushroom, grown room and other agricultural applications
u All ventilation systems
¨ Buttons and LCD
CO2measurement
|
analog output
|
humidity
|
room temperature
|
relay turns on
|
lock mode
|
decrease
|
turn on/off
|
increase
|
switch setting
|
¨ Specifications
Gas detected
|
Carbon Dioxide (CO2)
|
Sensing element
|
Non-Dispersive Infrared Detector (NDIR)
|
Temperature sensor
|
NTC
|
Humidity sensor
|
HS series capacitive sensor
|
Temperature dependence
|
0.2% FS/℃
|
Temperature correction
|
Self compensation
|
Power supply
|
24VAC/VDC, or 100~240VAC, 60HZ, selectable with the order
|
Consumption
|
3.5 W max. ; 2.5 W avg.
|
Accuracy@25℃(77℉)
|
±30ppm + 3% of reading
|
Stability
|
<2% of FS over life of sensor (15 yr typical)
|
Calibration interval
|
ABC Logic Self Calibration Algorithm
|
Non linearity
|
<1% of FS
|
Pressure dependence
|
0.13% of reading per mm Hg
|
Altitude calibration
|
Programmable from 0-9,900m in 100m increments
|
Response Time
|
<2 minutes for 90% step change
|
Signal update
|
Every 2 seconds
|
Warm up time
|
2 hours (first time)
2 minutes (operation)
|
CO2 measuring range
|
0~2,000ppm (default)
0~20,000ppm, programmable selection
0~50,000ppm
|
CO2 setting & Display resolution
|
1ppm
|
Temperature measuring/ setting range
|
0~50℃(32~122℉)/ 5~45℃(41~113℉)
|
|
|
|
|
Humidity measuring/setting range
|
0~99%RH/ 5~95%RH
|
Analog output
|
0~10VDC linearized output or PID control output, selectable by end users
|
Output resolution
|
10Bit
|
Relay output
|
One or two dry contact outputs with programmable selection to control CO2, temperature, humidity
Rated switching current: 3A(220VAC/30VDC), resistance load
|
Communication interface
|
RS-485, 9600/14400/19200(default)/28800 or 38400bps (programmable selection), 15KV antistatic protection, 3 independent base address, max network node 64
|
Flow rates
|
Diffusion version 80 ~ 120 cc/min
Flow through version 40~50cc/min
|
Operation conditions
|
0~50℃(32~122℉); 0~95%RH,
|
Storage conditions
|
10~50℃(50~122℉)/ 20~60%RH non condensing
|
NDIR life
|
15 years
|
Weight
|
360g
|
Dimensions
|
130mm×90mm×40mm
|
Installment standard
|
65mm×65mm or 2”×4”wire box
|
Interface connections
|
Maxi. 9 terminals
|
Wiring standard
|
wire section area<1.5mm2
|
Approval Standard
|
CE-Approval
|
Programming and selection
|
Via internal jumpers and push-buttons on the panel
|
¨ Models Guide
F2000IAQ-CO2- X1 X2 Y1 Y2- RH- Z
X1 (the product type)
3- CO2 and temperature detection
5- CO2 and temperature detection with Modbus RS-485 communication
X2 (display type)
0-LCD display
1-LCD display with 3 LED lights beside
2-Backlit LCD display
Y1 (Analog output)
0-no analog output
1- 1 X 0 – 10 VDC output
2- 2 X 0 – 10 VDC outputs
3- 3 X 0 – 10 VDC outputs
Y2 (Dry contact output)
0- no dry contact output
1- 1 relay dry contact output
2- 2 relay dry contact outputs
3- 3 relay dry contact outputs
RH (Humidity detection and display)
No RH option indicates no humidity detection and display
Z (power supply)
C- 24VAC/VDC
D- 100~240VAC (just for IAQ-CO2-300Y2/500Y2)
Example: F2000IAQ-CO2-3011 indicates that it can detect CO2 and temperature with one analog output and one relay dry contact output. F2000AQ-CO2-5002-RH indicates that it can detect CO2 and temperature and humidity with two relays dry contact outputs, and Modbus RS485 communication