PJK-2A map digital planimeter
1.attractive price
2.have many good qualities
3.can work 30 hours
4.Area coefficient:2*0.1cm 2
PJK-2A map digital planimeter
1.Uses
Model PJK-2A is a popular digital planimeter with high precision.You can easily measure any areas of irregular outlines in any proportion and it's a necessary measuring instrument for geologic survey crew
2. Technical Data
measuring range: width:300mm maximum.Length:free size
the error of measurement:<0.3%
display:6-digit LCD
power: AC 220V 50Hz. DC7.2V
3.Structure
Digital Planimeter Model PJK-2A is made up of main engine and power source.
The main parts of the instrument are below(see Fig 1 and Fig 2)
4.Instructions for measuring
1) preparation for measuring
First put the power plug in socket on the instrument (see Fig 3 ). Then mark a point on the outline of the measured figure and this is starting point. Press the power button and the indicating lamp is. in this case you can begin your measuring.
2)measuring
First press “Clear button”.Then Put the tracer on the starting point and trace the outline of the figure with best accuracy, moving clockwise till the tracing point is back again on the starting point. If you want to hold the measured reading,please press “Hold button”. When press the hold button again, you can go on working.
3)The conversion between the actual area and the different proporation.
The measured reading isn't the actual area. you can convert it into actual area according to area coefficient table in different scales
There is an area coefficient table on the back cover
If there isn't the proporation you wanted on the table, you can know the area coefficient
Area coefficient =(proporation you wanted) 2×0.1cm 2
The actual area =The reading measured ×area coefficient
If the reading to be measured>999999, you can think it's one.
5.Charge for instrument
The instrument can work 30 hours continuly in sufficient power source. If it works over 30 hours,the power is insufficient and the green lamp is on. At this time,the instrument should be charged. If in the room,you can go on measuring while it is charged. And if the instrument not work for long,the bettery should be charged.
6.Fix a breakdown for instrument
Break down | Cause | Means |
the instrument doesn't work | the line between the main engine and power source is loose contact | connect once again |
the green lamp is on and the power is insufficient | battery should be charged | |
sensor doesn't turn | push it gently with your hand | |
display doesn't work | the instrument is in holding | Press CLEAR button |
measuring the known area for several times, the reading isn't accurate | the tracing arm is too short or too long | adjust the tracing arm |
Notes
1) Keep the instrument in a dry and cool place
2) When you use the instrument ,please handle with care
3) The battery should be taken out of the instrument when it doesn't work