Wide range applications in nitrogen boosting, CNG refueling station, HP air compressor sets etc.
High precise, balanced design minimizes vibration, crankshaft fatigue, bearing load, increasing service life as a result;
Frame: One-piece, cast iron heavily ribbed casting with tie bolt construction. Aluminum top cover and end covers;
Crosshead: one-piece ductile, with replaceable tri-metal shoes;
Bearings: Precise, split shell, steel backed tri-metal main and connecting rod bearings, held in place by 4-bolt;
Connecting rod: Closed die forged SAE4140 steel, heat treated, precise machined, H-section, rifle drilled for pin lubrication;
Crankshaft: Closed die forged from a solid billet of heat-treated SAE 4140 steel, fully machined and balanced. Main bearing journals are 7in. (178 mm), Centerline from bottom of frame is 20 in (508 mm);
Built-in lubricating oil guide groove minimizes the assembly space;
A large number of standard cylinders can be chosen, wide range of applications;
Maximum speed, 1200 rpm, Maximum discharge pressure, 42Mpa;
Wide range applications in natural gas processing, fuel gas pressure boosting, gas injection, gas storage, gas lifting, etc.
Model | MH62 | MH64 | MH66 |
NO. of throws | 2 | 4 | 6 |
Speed range | 600~1200RPM | ||
Maximum discharge pressure | 52MPa(7500psi) | ||
Drive mode | Natural engine/electric motor | ||
Frame HP@1200RPM | 1343kw(1800hp) | 2685kw(3600hp) | 4027kw(5400hp) |
Piston stroke | 152mm(6in) | ||
Rod diameter | 57mm(2.25in) | ||
Piston speed@1200RPM | 6.1m/s(1200fpm) | ||
Lube Oil Flow | 60.6L/min(16gpm) | 121.1L/min(32gpm) | 181.7L/min(48gpm) |
Dimension(Width*Length) | 4280mm×1420mm (14’1” ×4’8”) | 4280mm×2540mm (14’1” ×8’4”) | 4280mm×3660mm (14’1” ×12’) |
Frame Wt. w/Crosshead Guides | 3227kg(7100lb) | 6818kg(15000lb) | 10455kg(23000lb) |