The Microint interpolator is designed to convert standard 1Vpp analogue outputs to industry standard RS422A digital outputs.
:
Part | Interpolation factor | Resolution using 20µm scale |
Microint-10 | X10 | 0.5um |
Microint-20 | X20 | 0.25um |
Microint-40 | X40 | 0.125um |
Microint-50 | X50 | 0.1um |
Microint-80 | X80 | 62.5nm |
Microint-100 | X100 | 50nm |
Microint-125 | X125 | 40nm |
Microint-200 | X200 | 25nm |
Microint-250 | X250 | 20nm |
Microint-500 | X500 | 10nm |
The Microint range of interpolators is designed to accompany the Inoservo's Microlin,Maglin and Renishaw's RG2 20µm and RG4 40µm encoder systems by offering a wide range of interpolation factors that convert standard 1Vpp analogue outputs to industry standard RS422A digital outputs.
These interpolators can be used with Inoservo's Microlin,Maglin and Renishaw's RGX planar encoder system to enable easy integration with industry standard digital controller inputs.
The Microint interpolator range allows the customer to utilise either analogue or digital outputs from the same equipment. Analogue signals can also be interpolated to give compatibility with digital controller inputs without the added investment required for the re-design, purchase, and installation of new readheads.
Microint dimensions:
Input/Output pin definition:
Input pin definition(plug)
Pin | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |
Function | NC | NC | NC | NC | GND | +5V | COS+ | SIN- | NC | NC | ZERO+ | ZERO- | NC | COS- | SIN+ |
Output pin definition(socket)
Pin | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 |
Function | B+ | GND | A+ | NC | NC | NC | +5V | NC | B- | A- | Z- | Z+ | NC | NC | NC |
Operating and electrical specifications:
Power supply: 5V ±5% <300mA (interface only)
Temperature: 0-55 Deg
Humidity: 10-90% RH non-condensing
Sealing: IP40
Connectors (input/output): 15-way D type socket/plug
