1.Output: Dim 3000mm,1.3m/h,900kg/h
2.Total installed capacity:about 550KW
3.Specification:1400mm-3000mm
4.Stable operation.
PE Large-diameter Hollowness Wall Wingding Pipe Production Line
Equipment composition
No. | Machine composition | Quantity |
1 | SJ120*30 single extruder SJ90*30 single extruder | 1 set 1 set |
2
| Clue extruder Square pipe extruder | 1 set 1 set |
3 | Vacuum spray water tank | 1 set |
4 | Spray water tank | 1 set |
5 | Hall-off machine | 1 set |
6 | Forming Machine | 1 set |
7 | Dicing Saw | 1set |
8 | Automatic feeding machine | 3set |
9 | Electronic control device | 1set |
Technical parameter
SJ120*30 Single extruder
—Material of screw & barrel
38CrMoALA,Nitriding depth of screw 0.3-0.6mm
Nitriding depth of barrel 0.4-0.7mm
—Hardness HV≥700
—Reduction box Hardening and helical gear of staged and tooth surfaced adopt ground finish.
—Direct current governor .Euroherm
—Barrel cold chamber, nitride treatment, water cooling and force feeding zone.
—Screw Nitrogen treatment
—Continuous current dynamo Z-280-21,150-1500r/min
—Continuous current Z-224-31,150r/min
Item | SJ-120*30(Square extruder) | SJ-90*30(Glue pipe extruder) |
Motor power: | 200KW | 90KW |
Heating power: | 54kw | 30kw |
Out put: | 650kg/h | 300kg/h |
Barrel heating zone: | 6 zones | 5 zones |
Barrel cooling zone: | 6 zones | 5 zones |
Die heating zone: | 3 zones | 5 zones |
The diameter of screw: | 120mm | 90mm |
Screw L/D: | 30:1 | 30:1 |