lighting remote control switch (with dimmer):
1.One way output power: 25~300W
2.50 meters remote control range in the open air
lighting remote control switch (With a dimmer)
1. Item No:WK-1047E
2. Working radio frequency: 433.92MHz/315MHz
3. Input Voltage: 110V/60Hz;220V/50Hz
4. Standby power: 0.67W-1.5W
5. Output Power(per way): 25~300W
6. Operating Range: less and equal 50 metres(open area)
7. Working Temperature:-20°~50°
8. Dimensions of the figure: Receiver:68*40*21mm
TransmitterE:104.5*37*17
9. QTY:60pcs CTN:48*44*36cm N.W:9kg G.W:10kg
10. Main Features:
(1)Wireless 1 Way control the lighting with dimmer.for this product all the groups can control independently.with chief on/off,subsection by manual operation
(2)With learning code function and 1,000,000 groups of encrypted
(3)Wireless control 1 sets of lights.Has all-direction RF remote control function and can penetrate thin walls.
(4)1 x 23A battery (included) for the transmitterB
(5)Remote control range less than or equal 50m
(6)For AC 220V or 110V.
11.Introductions:
(1)Remote control lights with the simple push of a button with a code!
Ainside digital anti-interference system and 1/100000 passwordcode can effectively prevent lighting automatically by mistake due to interference by extermal signal.
(2)Plug your lamp into the receiver. Delicate transmitter,there is 23A12Vbattery inside transmitter.The battery‘s life is up to one year with20 times presses a day.(Please replace the battery when you find the lamps get darker or the remote control range get shorter)
(3)A quick push of the button will turn lamp on and off.
(4)Just plug Receiver intall into the lamp.
(5)Controller must match Receiver frequency.
(6)Ideal for children
(7)Delicate receiver,easy and conveniently to install,apply for various lighting fixtures and small power appliance.(look at the Instructions as below):K is a wall switch!
The main function with dimmer:
(1)In initial state,press transmitter button A,the light is weak,press button B to change and let the light strong:in initial state,press transmitter button B,the light is strong,press A to change and let the light weak.Press button D to open or close the lamp
12. Installation and using notices
(1)Please check the electronic wire which connected with the lighting whether short circuit or breakdown when installation
(2)Please check which is connection line,search details on the outside of the cover of the products.
(3)All the products are work well before ex works,do not open the cover and make some changes,if the remote control distance shorten,please change the battery(12V23A)
(4)Please cut off the power when happen abnormal phenomenon in using process.
Remark:The output Power shown as above is working by220V;it will be half when the input voltage is 110V
cm
