1. High metal recovery rate: 95%~98%;
2. Less floor space, low maintenance cost.
1. Technical Introduction
This equipment is designed for large or medium-sized PCB factories (monthly production is above 30,000 square meters) to recycle strictly controlled or hazardous waste material such as copper clad laminate, rim leftover, discarding boards and drilling powder.
2. Application Scope
It is applied to PCB solid wastes in printed circuit boards (PCB) plants or copper clad laminate (CCL) manufacturers.
3. Equipment Introduction
3.1 Work Flow
This technique adopts so far the most advanced new treatment which is high-speed vortex crushing and separating. It can crush the raw material into small particle and in the meantime separate metal and non-metallic materials. The whole process proceeds in enclosed production line without secondary pollution. It is composed of following major subsystems: coarse crushing and conveying system, high-speed vortex crushing and separating system, metallic powder purifying and collecting system, non-metallic powder classifying and collecting system, dust collecting system, exhaust gas collecting and noise treatment system and auto-control system.
Waste PCBs |
Coarse Crushing |
Combined selection |
Fine Crushing and Separating |
Refined metal powder |
Metal Concentrate |
Non-metallic powder (coarse graded)
|
Non-metallic powder |
Pulse bag filtering |
Cyclone dust extracting |
Classify |
Refinin |
Process to VT powder |
Non-metallic powder (coarse graded)
|
Refined copper powder |
Spec. Models | Total Power | Floor Space (L×W×H) | Production Capacity (kg/h) | Metal Recovery Rate | Metal Content in Nonmetallic Powder (wt%) |
RPCB-1000 | 95kw | 18×5×5 (90m2) | 200 | 95%~98% | 0.5~1.5 |
RPCB-1500 | 160kw | 18×6×6 (108m2) | 300 | 95%~98% | 0.5~1.5 |
RPCB-3000 | 260kw | 25×6×6 (176m2) | 600 | 95%~98% | 0.5~1.5 |
4. Environmental-protection Standards
4.1 It is dry physical method for PCB recycling. No wastewater or residue produced during production.
4.2 Noise, dust and exhaust gas consist with coordinate national standards.
5. Features and Advantages
5.1 The equipment is running in enclosed space. No secondary pollution occurred.
5.2 High metal recovery rate: 95%~98%;
5.3 Less floor space, low maintenance cost.
5.4 Direct usage for nonmetallic material and its zero pollution and discharge.