Water reducer
1.water reducing ratio 18%-25%
2.little dosage 0.6%-1.2%
3.Fluidity 240mm
4.cement saving 15%

1.Enhance the effect of the concrete as following:

15-20% of cement can be reserved under the condition of the same caving in and same strength

Non-poisonous, odorless, non-flammable and non-corrosive to steel bars.

Suit for blend for the C30-C60(32MPA-80MPA )concrete

Degree of collapses(Degree of fluidity): 180 mm- 280 mm

Reducing ratio 18%-30%

As the condition of the material and the climate where amount of cement and collapsibility are fixed aforehand, mixing water can be decreased by 18-28% when it is mixed with reinforced concrete at 0.5-1.2%. Statistically, compression strength on the lst day, the 3 rd day and the 28 th day after single application is increased by 60-100%, and 30-60% respectively when it is added at standard blend dosage. The compression strength, tensile strength, buckling strength and modulus of elasticity will be improved.

 2. Scope of application

Apply to Natural curing concrete and aerated concrete

Apply to compound lean concrete and high strength concrete

Apply to all types of Portland cement

3. Application method

The quantity scope to be mixed:0.4-1.2% of the weight of cement, better performance will be given if the scope could be controlled by 0.5-0.8%.

The N-series High Range Water Reducers could be:1. directly mixed in cement2. compounded to solution before mixing with water added to cement.

4.Quality control

5.Products pictures