UV varnish
1. good adhesion,high gloss,high abrasion,
2.low odor
3.saves one step of process and reduce the risk
4.fast dry

 new line  UV varnish LC-2902 for offset printing is our new product in our factory ,is an prdinary Uv varnish,suitable in middle industry.

1.It is widely used for different types of paper to provide high adhesion.

Specifications

Appearance: light yellow to yellow transparent liquid.

Viscosity25°c: 190-210CPS

applications:

1. Applied by roller coater, in-line or off-line. Coating weight depends on quality of paper.

2. UV light of intensive  100mj/cm² is suggested for curing.

3. Clean up all other UV varnish in the tank and rubber roller before use .

Using Methods and Notice

1.      Notice

1) The varnish must be completely cured, or it will cause a lot of after-effects: such as the light faded color change, can not resist rubbing, get sticky, and so on;
2)Paper will become less viscously, so particular attention should be paid to the selection of the paste and the paste operations to ensure quality;
3)UV lamp should be cleaned regularly, check with the cleanness of blade and steel wheels to avoid that the paper sticks as the varnish on the back;
4)UV oil should keep away from light, heat; heating varnish under 60 °C, so as to prevent it from hardening.

2.      Security issues 

(1). After curing, this product is not toxic and irritative, but should be cleaned with a basic soap at least 3 times in 30 minutes after skin contacts. Change clothes attached to avoid skin burn caused by a long time attachment;
(2). Keep the workplace in good ventilation, cooling, fireproofing at the same time.

packing: 20 kg drums