Welcome to B2BAGE
encolsed dual output switching power supplies D-100-B
encolsed dual output switching power supplies D-100-B

Minimum Order: 0
Quality/Safety Certification: 0.00

encolsed dual output switching power supplies D-100-B
CE approval, with better radiating effect
high quality, best serveice

encolsed dual output switching power supplies D-100-B

1.100W dual output switching power supply
2.CE/ISO9001 certificate
3.Competitived price,good quality
4.Samples available

100W switching power supply Competitived price and high reliability 105oC Output capacitor AC input power suitable for the world High efficiency and low operation temperature Soft-start current can reduce the AC input impact effeciticly With short-circuit and overload protection Compact size, light weight 100% full-load burn-in test Installed with EMI filter, minimum wave

DC output voltage5V12V5V24V
Output voltage range(Note:2)±2%±6%±2%±7%
Rated output current15A2A15A1A
Output current range1-15A0.3-2A1-15A0.2-1A
Wave and noise(Note:3)100mVp-p100mVp-p100mVp-p100mVp-p
Inlet stability(Note:4)±0.5%±1%±0.5%±1%
Load stability(Note:5)±0.5%±5%±0.5%±6%
DC output power98W99W
Adjustable range for DC voltageCH1; +10, -5%CH1; +10, -5%
AC input voltage range88~132VAC/170~264VAC selected by switch 47~63Hz;120~370VDC
Input current2.8A/115V 1.6A/230V
AC inrush currentCold-start current 35A
Leakage current<3.5mA/240VAC
Overload protection105%~150% Type: pulsing hiccup shutdown Reset: auto recovery
Over-voltage protectionCH1: 5.75~6.75V
Temperature coefficient±0.03%/°c(0~50°c)ON+5V
Setup, rise , hold up time200ms,50ms, 20ms at full load
Vibration10~500Hz, 2G 10min,/1cycle, Period for 60min, Each axes
Withstand voltageInput and output internal: Input and encolsur: 1.5KvAC, Output and enclosure: 0.5KvAC
Isolation resistanceInput and output internal: Input and enclosure, Output and enclosure:500VDC/100MΩ
Working temperature and humidity -10°c~+60°c(Refer to output derating curve), 20%~90%RH
Overall dimension199×110×50mm
Safety standardsUL 1012, TUV EN60590(IEC950, UL 1950) Apporved
EMC standardsCISPR22(EN55022)class B, IEC801-2,3,4 IEC555-2 Verification

Note:                                                                                                                                                                     1. The testing condition for the paramenter above is: 230VAC input, rated load, 25°c 70% RH. Temperatuer.                 

2. Error: include the setting error, line stability and load stability.(Note:5).                                                                                                                                                             3. Wave test: adopting "A12" double wire for 20MHz, and 0.1UF&47UF capacitor short-circuit for interrupting.               

4. Inler woltage stability test: when is over load, the lowest voltage of inlet is up to the highest voltage.                         

5. Load stability test: The load is from 0% to 100%.                                                                                                 

6. Total output canba maxinum Current, total load can not exceed the maxium output power.

Ads by Google

About Us | Contact Us | Help | Terms & Conditions
Hot Products: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9
Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.